- Weatherproof sealed housing
- Digital technology
- D-TecPlus sensor system (DTSS)
- Low energy consumption
- CNC machined Tru-Runline wheel
- Dual Multicolor LEDs (Red, Green, Blue, Orange, Purple & White)
- On/off switch with two function modes (day and night mode)
- In night mode, both LEDs light up discreetly in the desired night light color
- Conical high quality speaker
- Stable 3/8 stainless steel thread
- Rubber inserts protect the rod blank
- Ergonomic, graduated pitch adjustment (8 pitches selectable: turning clockwise increases the pitch, turning it counterclockwise decreases it)
- Ergonomic, graduated sensitivity adjustment for the intelligent See Saw false alarm suppression system (8 different sensitivity levels selectable – see the sensitivity table below compared to the NTX-R)
- Range test function makes it possible to use the RX+ receiver to check whether the transmission range is sufficient
- Low battery warning indicator (LED color changes to cyan when the battery needs to be replaced)
- Power output socket (2.5mm) for use with illuminated swingers
- Two washer options: hard, soft and one additional soft washer per alarm included
- Runs on 2 x AA batteries
Improvements compared to the NTX-R
- Longer ears without tapering towards the top
- Double multicolor LEDs, one per ear at the top
- External push button for the multicolor LEDs with Color Sync color synchronization – simply change the LED color using the button on the battery compartment cover
- Manually selectable day and night mode
- External Vari-Bright adjustment of the brightness of the LEDs to adapt them to the fishing conditions (choice of 3 brightness levels in day mode and 3 brightness levels in night mode) – also easily adjustable via a button on the battery compartment cover
- The impeller compartment is cut out further so that water can run off better and frost can hardly freeze the impeller or dirt can fix it
- Even stronger transmission signal to the RX+ receiver
- Improved and increased sensitivity variability (see below)
Sensitivity Control
At all sensitivity levels (except for the maximum sensitivity level), the cord must be moved a specified distance in one direction within 2 seconds in order to trigger a signal tone. Any movement in the other direction within this time resets the sensor to zero. This drastically reduces false alarms caused by wind or water movement.
Line movement RX+ Line movement NTX-R
Level 1 (Min) 90mm 74mm
Stage 2 73mm 56mm
Stage 3 56mm 48mm
Stage 4 34mm 40mm
Stage 5 17mm 32mm
Stage 6 11mm 24mm
Level 7 5.6mm 16mm
Manufacturer:
FOX International Group Ltd, Dennenlaan 3A, 2340 Beerse, Belgium,
Implied warranties
Information on the statutory warranty
products number (s) of the manufacturer
CEI159
GTIN:
5055350298862
